Recent Activity

KEN MACDONALD replied to the thread SPARK CONCEPTS XPRO V3 PROBLEM.

Ok thankyou I'll take a look, but it's quite a large difference. I've just tried to centerline cut a letter H which measures 50mm square...

Caitlyn replied to the thread BBx32 Out of Box issues.

I was thinking some form of safety light (like the cheap red/yellow/green ones) to indicate machine is running / stopped / etc. (So...

KEN MACDONALD posted a new thread.

SPARK CONCEPTS XPRO V3 PROBLEM

Hi I've just tried to do some cutting on my Ooznest OX cnc, but it seems to have developed a fault. I suspect its the control board...

Forum: Controller Boards

mleaming liked cnc-trucker's post in the thread Standalone Torch Height Controller for CNC Plasma Cutting.

Jeramiah, in one of your posts in this forum topic, you stated that if anyone could integrate your THC into a GRBL machine, you would...

Caitlyn replied to the thread BBx32 Out of Box issues.

v1.2 is printed on the PCBs. I have two of these x32s, bought years ago, and finally putting them to use. Both are exhibiting the same...

Rick 2.0 replied to the thread OpenBuilds Table Series.

4x4s and 2x8s would probably be your best bet.

Rick 2.0 replied to the thread Workbee Lead 1000x1000 Wheel Clearance too tight.

Yes. And if in doubt this is fairly easy to check with digital calipers. Set the wheels in place and measure between the inside edges of...

Rick 2.0 replied to the thread Workbee Lead 1000x1000 Wheel Clearance too tight.

It is and this can be found in a number of threads over the years, most of them 8-10 years ago. There were a lot of problems with...

Giarc replied to the thread Workbee Lead 1000x1000 Wheel Clearance too tight.

One of the holes is a little over 7mm for the eccentric nut. Did you account for that?

Caitlyn posted a new thread.

BBx32 Out of Box issues

Hello, I am brand new to GRBL & Blackbox x32, so please forgive me if these are elementary questions. Relay1: This port, which is...

Forum: Controller Boards

Pbmaster11 posted a new thread.

Any machine designers out there for hire?

Hello everyone! If this against the rules please delete. I am in need of a super simple CNC drilling unit. I plan to take a variable...

Forum: General Talk

David the swarfer replied to the thread Jogging issues.

replace the mouse NOW I have had this exact thing with 2 different brands of wireless mouse (Microsoft and Genius), a cheap wired USB...

David the swarfer liked dJOS_500's post in the thread Upgraded 3018 Pro using MGN15H Linear Rails and a 500w Spindle.

My CNC machine making something for a change! [MEDIA]

Giarc liked dJOS_500's post in the thread Upgraded 3018 Pro using MGN15H Linear Rails and a 500w Spindle.

My CNC machine making something for a change! [MEDIA]

Philip UD attached a file to the thread C-Beams, Ball Screws, and MGN Rails.

Can't believe it's been over 7 years. Anyway, it worked and was just what I wanted for detailed work on brass and aluminum. However,...