Fun build and the videos helped. Ill change a few things going forward but all in all a good product.
Bored in the garage enclosure build
Build in 'CNC ROUTER BUILDS' published by frank anderson, Jun 18, 2020.
2 days to build Up and running some EMI issues but I think I have them resolved Big shoutout to the community
-
-
-
- Build Progress:
-
- Build in Progress...
-
Special Notes
The outside is skinned in .25 grey mdf and white inside.Th core is 1.5" shipping foam in between the sheets. The entire frame is made of 80-20 on 4"casters with brakes on each wheel that can handle the weight. Rolls very nicely.I used 4" led can lights in the ceiling and vented them using some metal speaker grill to disapate heat. the lower area i used some aluminum sheet to enclose the electronic parts.I also used 4" fans on both sides for cooling. Th vacuum system has a detachable hose that has a ground strap running through it. I used a ground bar and put grounds from each motor to that point and from there to a ground clamp on my breaker box.
-
-
Build Author frank anderson, Find all builds by frank anderson
-
- Loading...
-
Build Details
- Build License:
-
- CC - Attribution - CC BY
Reason for this Build
needed a new machine for the garageInspired by
Mark for the help -
Parts list
Qty Part Name Part Link Comments 1 Lead 1010 Link common 80-20 parts and MDF skins -
Attached Files:
-