Build List
-
Active Filters:
a
Build Author deltajegga Views 8352
THE delta
probably as big as you'd want it...
Budget friendly starter build
DIY CO2 laser build. Budget friendly, 2020 T/V-slot profiles and scalability.
Build Author Ted Moyer Views 3742
LEAD 1515 HIGH Z MOD 4KW ER20 7.5 KW VFD
OLD Lead 1010 High Z Mod converted to Newest Lead 1515 with High Z mod, slimmer cbeam motor mounts, thrust bearings etc. Extended by original table out and upgraded my 1.5kw VFD and Spindle to 4kw ER20 Spindle and 7.5kw GT VFD
Lead 1010 First time build
First time build of the Lead 1010 CNC with the High Z add on.
Build Author boutrous Views 7520
Laser Rotary Attachment
Build Summary updated after parts list completed
Filament winder ( carbon fiber )
Carbon fiber filament winder
Fixed Gantry Easy Assembly
Fixed Gantry CNC with good accuracy and rigidity but for a higher price than the usual CNC's on the site.
Dedicated Rotary Laser Made from Scrap and Spares
A clone of https://openbuilds.com/builds/dedicated-compact-rotary-axis-laser-engraver.10204/
Custom 40W Laser Cutter
So this is my custom 40W build. I wanted to make another laser similar to the one I built but a lot smaller and an all in one system so that if I ever decide to do a farmers market or something similar, I wanted to be able to put the laser on the back of the car and drive to whatever location. I think it's going to work. It will be see-through with lights and screens eveywhere. The lights alone should attract people like flies. That's the plan anyway.
Y table for LEAD Lathe - essentially a High Z Cbeam XL
I built the lathe as a dedicated rotary axis, but I soon realized I could have a back up CNC for very little expense.
Build Author Jasont Views 2554
MY first CNC build
my first cnc build using the lead 1010 to build bigger and better!!
Build Author Sonny Lowe Views 5285
MakerSL MSL-65 Manual Coffee Grinder Stand
I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.
Sphinx 55 on MGN12 linear rails
My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw
1010 with linear rails
Has a 700 by 700 cutting area and is very stable
My 3D Printer
A DIY 3D printer. At beginning made from aluminium profiles, aluminium sheet and wood :)
THE BIG GREEN MACHINE
1500*1500*1900 (xyz) Biocomposite Pellet 3D printer
Build Author sausagePaws Views 1742279
DIY Embroidery Machine V2
My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.
3D printer for printing Clay/Paste
I designed this 3D printer from scratch for my mechanical engineering capstone project. It's made for printing clay but should be able to print any paste material. The clay extruder system could be easily modified to work with almost any 3D printer. The printer is approximately the same size as an Ender 3.
Build Author Jason @ MCC Views 9233
QueenBee Pro CNC Router and Lathe
A 1000x1500mm QueenBee Pro with a 4th Axis Rotary attachment/Lathe Bed.
Build Author nc3dpw Views 20588
(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in
Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.
Build Author JCPhlux Views 24176
Tesseract
Large Core XY 3d Printer W/fixed build plate
Build Author tarekhassan2030 Views 3825
Home build from A to Z
I made this from A to Z at home by myself with reading and watching tones of videos. 50 cm X 50 cm but I get 40cm x 35 cm as a real workread
2 Axis Lathe cutter
Rubber company use as a lathe cutter for accurate cuts compared to hand cutting.
Build Author Rick 2.0 Views 14747
C-Beam Mini Mite
A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.
Horizontal Cantilever or Vertical Diode Laser Engraver
Light weight portable Laser Engraver (6.5lbs - 12lbs)
Build Author BNMaker Views 9873
+Laser
A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.
Dragon Portable CNC Plasma Cutter
A small portable CNC Plasma Cutter with some unique features
Build Author viktop Views 21074
Simple Cnc System (arduino Grbl)
Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.
Build Author ahayden Views 25041
C-Beam Prefab Untitled
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
C-beam charmer
Double C-beam Y axis 500mm., Double 2080 X axis 600mm. , C-beam Z axis 250mm, TB-6600 drivers, MKS-DLC32v2 GRBL w/wi-fi and blue tooth
Remote Toiler Flusher!
This project provides an easy method for my granddaughter to use the facilities in the smallest room of the house! The toilet cistern is located in the garage and was originally manually activated by a pushbutton connected via a cable. The location of the pushbutton - combined with the stiffness of the mechanism made it tricky for her to use. This project provides a solution to the problem.
Build Author Indieflow Views 109956
Indie i2
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
Build Author Troy Joachim Views 15355
Prusa i3 Bear IDEX
Remix of the Prusa i3 Bear with added IDEX
Build Author joetemus Views 24270
K40 ACRO Conversion
A K40 to ACRO Co2 laser cutter build. Designed and built to expand the work area of the K40
Build Author James Archer Views 12125
Archer - An extendable all metal 3D printer
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
Desktop CNC
A desktop Cartesian CNC router
Build Author OpenBuilds Views 8942
Swing Arm
Simple Swing Arm Build for the Modular Table Series. Create a simple vacuum swing arm that swings over your machine keeping your vacuum hose and router cord, etc. up and out of the way
Build Author mytechno3d Views 12904
Z FLoating head for Plasma cutting (OX CNC compatible)
How to convert your OX CNC to a plasma cutter at low cost
W|W plasma/drag knife 1500x1500 (floating head & z-axis)
Step by step designing and implementing of my plasma approach
Build Author Ahmed Ibrahim Views 6590
Cairo Mini 3d-Printer
We are introducing the Cairo Mini 3d-printer! It’s a DIY fully Open-source Reproducible 20x20cm 3d-printer. The original goal of the Cairo Mini 3d-printer is to create a low-cost 3d-printer below 220$(3500 LE). That anyone can build with ease.
Build Author stephen cia Views 32372
ZideX
3D printer with 7 drivers, compact, dual extruder, no CNC part. All Openbuilds and 3D printed part. This is purely experimental.
Build Author Leonard Cross Views 33746
Workbee CNC Router/Laser/Plotter
A CNC machine with an expansive 30x30" work area, supporing a router, laser, simple plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.
Build Author blterry1 Views 16422
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
3D Turn Table Scanner
My attempt at a 3D scanner. Still trying to convince myself it will work.
New Workbee Z Axis
Hopefully an upgrade of the Z axis of the Workbee.
V-Slot Miter Saw Stop
A quick and simple saw stop build.
Travel Printer
Build using standard parts as much as possible, Open Builds etc. To keep printer usable for more materials will be trying a heated bed with rotary elec union for the thermistor and power.
ACME OX (A Lead Screw Driven Ox Derivative (850x1500))
Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.
DIY CNC Machine
In this project, I show you how I built my DIY CNC machine. All moving parts of the DIY CNC router are running on ball bearings while the structural parts are made with natural materials, namely birch plywood and solid beech wood.
Build Author Ariel Yahni Views 50578
UK40OB
Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.
SolidCore CoreXY
All metal CoreXY 3D Printer Design with triple z, kinematic bed, and scalable corexy mechanism.
Build Author Damian V-SLOT Poland Views 14071
DIY Slab Flattening Mill
V-SLOT profiles and OpenBuilds accessories give us many possibilities. We decided to build a manual ROUTER SLED using only components of the OpenBuilds system. The design is simple to build, construction takes little time, and the frame is easy to transport.
Custom build 80w Co2 Laser Cutter
Building a custom made 80W Co2 Laser cutter. Making it from scratch and it's a work in progress but I've learned a lot and I'll be sharing a bit of that knowledge with you guys since I've learned a lot from here.
Ike:Laser
A 2 axis laser engraving machine, with a manual Z axis.
Build Author Lindsey Lewis Views 7772
Update Eleksmaker with Openbuild eccentrics for X-Carriage
A simple approach to making the Eleksmaker A3 Laser build have a better functioning X-Carriage! Of course this assumes you bought an Eleksmaker A3 or plan to.
Build Author Scott Martinez Views 10166
The Growler
This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.
Build Author Jay Almers Views 6351
FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router
My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.
Build Author Serge E. Views 58972
myOX : a 4' x 2' OX CNC with potential
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
Homemade CNC
This started as an attempt to learn to weld and quickly took on a life of its own.
Ooznest Ox with 3D Printed Gantry Plates
Ooznest Ox with gantry plates and end caps 3D printed in ABS rather than aluminum.
C-Beam XXLarge "Tank"
This is a modified build C-Beam XLarge. 1000mm C-Beam used for X and Y axis, and the Y Axis moves the X bridge, not the material being worked.
The RAT. A form ply and aluminium hybrid.
A hybrid of form ply and aluminium. 835x1260x100mm working envelope.
7 Axis Camera Slider with Telescoping Vertical Lift
A six axis camera slider with a 7th LIFT axis added!
Build Author Dave420 Views 13058
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
Build Author Frank Gore Views 7248
Kossel Extreme
A custom Delta printer for large projects with any filament that still retains speed and accuracy, all within a 15 amp/110VAC power budget. Based on Johann's Mini Kossel design.
Build Author BeTrue3D Views 20106
BeTrue3D Printer
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
ME - Laser CNC
Build of a small laser engraver using V-slot profiles and 3d printed parts
Build Author pedrofernandez Views 16057
Co2 Laser Cutter/Engraver Rotary Attachment
Vslot rail system at work again, laser cutter/engraver rotary device for cylindrical objects .
The Franken Rotor
Yes another K40 Franken machine dedicated for round objects,,,
Build Author M1dn1ghtN1nj4 Views 8015
The Beast
This is a heavily modified system based on the RatRig V-Cast. Lots of personal touches, and a LOT more to come!
Build Author winand Views 15550
YAOP (Yet Another Openbuilds Printer)
Yet Another Openbuilds Printer, my version :-P
Mini lathe CNC Conversion - Work in progress
My on going build of CNC Mini Lathe
Build Author sgspenceley Views 183795
Linear Rail CNC Machines
A CNC build using linear rails & lead screws.
Build Author rcKeith Views 6070
USB Hot Wire CNC Foam Cutter
Build a Hot Wire CNC Foam Cutter with inexpensive 3d printer electronics.
M10CUBE PICO CNC. A Universal Controller
An attempt is to be a Unified Modular Controller based on M10CUBE platform. For GRBLHAL and MARLINHAL applications. HAL porting is under way 1 - WIZnet Pico Clone W5100S-EVB-Pico 2 v- 6 X StepStick. Not sure about the sixth driver, (Pico pins limitation) . External connectors for larger drivers 3 - Opto - isolated spindle PWM. 4 - HMI 5 - I/O on diferent modules and Ethernet 10MBPS communication. Patches will be written to GRBLHAL for Ethernet I/Os (Interrupted).
Build Author Edgar Mata Views 19798
ME - Core XY 3d printer
I wanted to make my own Voron, so I made my own Voron,
Build Author LukasK Views 21447
LS-LASER
I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.
Build Author Mark Carew Views 119729
V-Slot® NEMA 17 Linear Actuator (Belt Driven)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
Build Author Savvas Views 18118
C-Beam Lead Screw CNC Mountain
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
5 X 5 Plasma SIMPLE Build
5 X 5 Plasma table...Hypertherm 45 XP....CandCNC....Openbuilds
Build Author T4Concepts Views 71716
WorkBee CNC build - My honest opinion, tips and help
My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.
Build Author pedrofernandez Views 34124
Openbuilds Table Top 50w Co2 Laser Cutter/Engraver
DIY build of a Co2 Laser cutter/engraver 12x24 working area.
Build Author Glenn Weston Views 9320
"AcroCadabra" My Acro Laser built with my C-Beam XL
Well I built a C-Beam XL around a year ago, I am still learning things as I make stuff with it, it has been quite a wonderful learning experience. Now I have gained enough confidence and knowhow to Mill the required Plates to build an Acro Laser System using the Acro Laser Sketchup Model. I have pulled the Model apart in Sketchup, isolated the Plates and generated the G-Code to cut/Mill the plates. I have used Sketchucam to generate the G-Code. I Use Mach3 on my C-Beam XL to Mill.
Draw bot core xy
In the design stage. Help guide.
MiniMill Z Axis Upgrade with Offset Motor
Upgrade your Minimill with an off-set Z Axis Motor
Build Author Shaun Weitzel Views 4782
OpenBuilds Lead 1515
First build of a Lead 1515!
Robo Morten
A horizontal-router CNC using openbuilds parts geared toward routing out mortise and tenon joinery; or any other end grain work on wood.
Build Author Keith Davis Views 8411
Upgrading Your 3D Printer With Synchronous Leveling
Upgrading printers for Synchronous Leveling
cera.tops Clay 3d Printer
This 3d printer framework was designed for use with the ceraStruder clay 3D printing extruder. More info coming soon.
Another C-Beam machine
This is basically a Sphinx variant with few changes of my own...hope it'll work.
Build Author ymilord Views 54989
FARM OX (Four Axis Rotary Machine)
Four Axis Rotary Machine (FARM) OX. Equipped with a X,Z,A & C Axis.
Build Author HPB Views 40300
A simple XY laser engraver/cutter
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
C-Beam Dust Shoe
A short description of the dust shoe I made for my machine.
Build Author Martin.Barfoed Views 5041
40x40 V-Slot Rod Type Linear Actuator
A Rod-type Linear Actuator based on the 40x40 V-slot profile
Build Author Robert Hummel Views 149506
Laser V
With such great success/attention my laser got, I ended up with a good friend that would like to dabble in stencil art and so I have decided to share my build with him and you here :) I will be using all the same electronics as in my previous build except the driver boards I will be using are the famous reprap 4988's they are more easy to come by and cost less. I will also be using open builds mini v wheels/v groove extrusion just so I can get a feel for their versatile products
CubeFoot CNC
This small desktop machine is built inside a 300mm cube of 20mm extrusion. Work area is 14cm by 14cm. I used 400 step nema17 motors all around.
Build Author shanehooper Views 12468
SolidCore CoreXY 3D Printer
Modular and Scalable CoreXY Printer with all metal parts.
Build Author Michael.M Views 61079
GRANITE 1.0
This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.
Makerparts Mpro Slider System
Makerparts.ca MPro Camera Slider System
Adjustable Router Guide Template
This project is an adjustable router guide template made with 20x60 V-slot. It was meant as a less expensive and more user friendly alternative to commercially available units.